View PS8802-1_177670.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www..com
PHOTOCOUPLER
PS8802-1,-2
1 Mbps HIGH CMR ANALOG OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED PHOTOCOUPLER
-NEPOC Series-
DESCRIPTION
The PS8802-1, -2 are optically coupled isolators containing a GaAlAs LED on the light emitting diode (input side) and a PIN photodiode and a high-speed amplifier transistor on the output side on one chip. The PS8802-1, -2 are designed specifically for high common mode transient immunity (CMR), the PS8802-2 is suitable for high density applications.
FEATURES
* 40% reduction of mounting area (5-pin SOP x 2) * High common mode transient immunity (CMH, CML = 10 kV/s MIN.) * High supply voltage (VCC = 35 V) * High isolation voltage (BV = 2 500 Vr.m.s.) * High-speed response (tPHL = 0.8 s MAX., tPLH = 1.2 s MAX.) * Ordering number of tape product: PS8802-1-F3, F4: 1 500 pcs/reel : PS8802-2-F3, F4: 1 500 pcs/reel * Pb-Free product * Safety standards * UL approved: File No. E72422 * DIN EN60747-5-2 (VDE0884 Part2) approved No.40008347 (option)
8 7 1 2 8 7
PIN CONNECTION
(Top View)
6 PS8802-1 5 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. NC 8. VCC 34
6
APPLICATIONS
* Computer and peripheral manufactures * General purpose inverter * Substitutions for relays and pulse transformers * Power supply
1 2
PS8802-2 5 1. Anode1 2. Cathode1 3. Cathode2 4. Anode2 5. GND 6. VO2 7. VO1 8. VCC 34
Document No. PN10418EJ04V0DS (4th edition) Date Published November 2004 CP(K)
The mark
shows major revised points.
PS8802-1,-2
PACKAGE DIMENSIONS (UNIT: mm)
5.210.25
6.00.2 3.950.1
3.270.2
0.15 +0.10 -0.05
0.10.1
1.27 0.4 +0.10 -0.05 0.25 M
0.50.3 0.10 S
MARKING EXAMPLE
PS8802-1
PS8802-2
8802-1 NL251
N
N L 2 51
No. 1 pin Mark Initial of NEC (Engraved mark)
Assembly Lot
8802-2 NL251
N
N L 2 51
No. 1 pin Mark Initial of NEC (Engraved mark)
Assembly Lot
Week Assembled Year Assembled (Last 1 Digit)
Week Assembled Year Assembled (Last 1 Digit)
In-house Code (L: Pb-Free)
Rank Code
In-house Code (L: Pb-Free)
Rank Code
2
Data Sheet PN10418EJ04V0DS
PS8802-1,-2
ORDERING INFORMATION
Part Number Order Number Solder Plating Specification Pb-Free*2 Packing Style Safety Standard Approval Standard products (UL approved) Application Part Number*1 PS8802-1
PS8802-1 PS8802-1-F3 PS8802-1-F4 PS8802-2 PS8802-2-F3 PS8802-2-F4 PS8802-1-V PS8802-1-V-F3 PS8802-1-V-F4 PS8802-2-V PS8802-2-V-F3 PS8802-2-V-F4
PS8802-1-A PS8802-1-F3-A PS8802-1-F4-A PS8802-2-A PS8802-2-F3-A PS8802-2-F4-A PS8802-1-V-A PS8802-1-V-F3-A PS8802-1-V-F4-A PS8802-2-V-A PS8802-2-V-F3-A PS8802-2-V-F4-A
20 pcs (Tape 20 pcs cut) Embossed Tape 1 500 pcs/reel
20 pcs (Tape 20 pcs cut) Embossed Tape 1 500 pcs/reel
PS8802-2
20 pcs (Tape 20 pcs cut) Embossed Tape 1 500 pcs/reel
DIN EN60747-5-2 (VDE0884 Part2) Approved (Option)
PS8802-1
20 pcs (Tape 20 pcs cut) Embossed Tape 1 500 pcs/reel
PS8802-2
*1 For the application of the Safety Standard, following part number should be used. *2 With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact your nearby sales office.
Data Sheet PN10418EJ04V0DS
3
PS8802-1,-2
ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified)
Parameter Diode Forward Current Reverse Voltage Power Dissipation Detector Supply Voltage Output Voltage Output Current Power Dissipation Isolation Voltage
*3 *2 *1
Symbol IF VR PD VCC VO IO PC BV TA Tstg
Ratings 25 5.0 45 35 35 8.0 100 2 500 -55 to +100 -55 to +125
Unit mA/ch V/ch mW/ch V V/ch mA/ch mW/ch Vr.m.s. C C
Operating Ambient Temperature Storage Temperature
*1 Reduced to 0.45 mW/C at TA = 25C or more. *2 Reduced to 1.00 mW/C at TA = 25C or more. *3 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output.
4
Data Sheet PN10418EJ04V0DS
PS8802-1,-2
ELECTRICAL CHARACTERISTICS (TA = 25C, unless otherwise specified)
Parameter Diode Forward Voltage Reverse Current Forward Voltage Temperature Coefficient Terminal Capacitance Detector High Level Output Current High Level Output Current Low Level Output Voltage High Level Supply Current (PS8802-1) High Level Supply Current (PS8802-2) Low Level Supply Current (PS8802-1) Low Level Supply Current (PS8802-2) Coupled Current Transfer Ratio Input-Output Isolation Resistance Insulation Resistance (Input-Input), (PS8802-2) Input-Output Isolation Capacitance Insulation Capacitance (Input-Input), (PS8802-2) Propagation Delay Time (H L)*1 Propagation Delay Time (L H)*1 Common Mode Transient Immunity at High Level Output*2 Common Mode Transient Immunity at Low Level Output*2 CTR RI-O IF = 16 mA, VCC = 4.5 V, VO = 0.4 V VI-O = 1 kVDC, RH = 40 to 60% 15 10
11
Symbol VF IR IF = 16 mA VR = 3 V IF = 16 mA
Conditions
MIN.
TYP. 1.7
MAX. 2.2 10
Unit V
A
mV/C pF
VF/TA
Ct IOH (1) IOH (2) VOL ICCH
-2.1 30 10 500 100 0.1 0.1 0.4 2
V = 0 V, f = 1 MHz IF = 0 mA, VCC = VO = 5.5 V IF = 0 mA, VCC = VO = 30 V IF = 16 mA, VCC = 4.5 V, IOL = 1.2 mA IF = 0 mA, VO = open, VCC = 30 V
nA
A
V
A
0.2
4
ICCL
IF = 16 mA, VO = open, VCC = 30 V
100
200
25
45
%
RI-I
VI-I = 1 kVDC, RH = 40 to 60%
1010
CI-O
V = 0 V, f = 1 MHz
0.6
pF
CI-I IF = 16 mA, VCC = 5 V, RL = 2.2 k, CL = 15 pF
0.3
tPHL tPLH CMH
0.3 0.6
0.8 1.2
s
IF = 0 mA, VCC = 5 V, RL = 4.1 k, VCM = 1.5 kV IF = 16 mA, VCC = 5 V, RL = 4.1 k, VCM = 1.5 kV
10
kV/s
CML
-10
Data Sheet PN10418EJ04V0DS
5
PS8802-1,-2
*1 Test circuit for propagation delay time
PS8802-1 (PW = 1s, Pulse input (IF) Duty cycle = 1/10) Input (Monitor) 47 VCC = 5 V
0.1 F
RL = 2.2 k VO (Monitor) CL = 15 pF Input (IF = 7.5 mA) 50%
Output PS8802-2 Pulse input (IF) (PW = 1s, Duty cycle = 1/10) Input (Monitor) 47 VCC = 5 V tPHL RL = 2.2 k VO (Monitor) 0.1 F CL = 15 pF tPLH 1.5 V VOL
Remark CL is approximately 15 pF which includes probe and stray wiring capacitance. *2 Test circuit for common mode transient immunity
PS8802-1 VCC = 5 V RL = 4.1 k 0.1 F VO (Monitor) CL = 15 pF VCM 90% IF 10% VCM tr VO (IF = 0 mA) VCC = 5 V RL = 4.1 k 0.1 F VO (Monitor) CL = 15 pF VO (IF = 16 mA) tf VOH 2V 0.8 V VOL
1.5 kV 0V
PS8802-2 SW IF
VCM
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of 0.1 F is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity.
6
Data Sheet PN10418EJ04V0DS
PS8802-1,-2
TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified)
DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE
Transistor Power Dissipation PC (mW)
50
TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE
120 100 80 60 40 20
Diode Power Dissipation PD (mW)
40
30
20
10
0
25
50
75
100
0
25
50
75
100
Ambient Temperature TA (C)
Ambient Temperature TA (C)
FORWARD CURRENT vs. FORWARD VOLTAGE
100 TA = +100C +50C +25C 10 000
HIGH LEVEL OUTPUT CURRENT vs. AMBIENT TEMPERATURE
High Level Output Current IOH (nA)
IF = 0 mA
Forward Current IF (mA)
1 000 VCC = VO = 30 V VCC = VO = 5.5 V
10
100
1
0C -25C
10
0.1
1
0.01 1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
0.1 -25
0
25
50
75
100
Forward Voltage VF (V)
Ambient Temperature TA (C)
CURRENT TRANSFER RATIO vs. FORWARD CURRENT
Current Transfer Ratio CTR (%)
70 60 50 40 30 20 10 0 0.5 1 5 10 50 VCC = 4.5 V, VO = 0.4 V
NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE
Normalized Current Transfer Raio CTR
1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 0 25 50 75 100 Normalized to 1.0 at TA = 25C, IF = 16 mA, VCC = 4.5 V, VO = 0.4 V
80
Forward Current IF (mA)
Ambient Temperature TA (C)
Remark
The graphs indicate nominal characteristics.
Data Sheet PN10418EJ04V0DS
7
PS8802-1,-2
OUTPUT CURRENT vs. OUTPUT VOLTAGE
10 25 mA 20 mA
Output Current IO (mA) Output Voltage VO (V)
OUTPUT VOLTAGE vs. FORWARD CURRENT
6 5 4 3 2 1 5.6 k
8 15 mA 6 10 mA
RL = 2.2 k
4
2
IF = 5 mA
0
2
4
6
8
10 12
14 16
18 20
0
2
4
6
8
10
12
14 16
18 20
Output Voltage VO (V)
Forward Current IF (mA)
PROPAGATION DELAY TIME vs. FORWARD CURRENT
Propagation Delay Time tPHL, tPLH (s) Propagation Delay Time tPHL, tPLH (s)
PROPAGATION DELAY TIME vs. LOAD RESISTANCE
10 VCC = 5 V, IF = 16 mA, CTR : 25% tPLH
3.0
VCC = 5 V, RL = 2.2 k , CTR : 25%
2.0
1
1.0
tPHL
tPHL
tPLH 0 5 10 15 20 25
0.1 1k
10 k Load Resistance RL ()
100 k
Forward Current IF (mA)
Normalized Propagation Delay Time tPHL, tPLH
NORMALIZED PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE
5 Normalized to 1.0 at TA = 25C, IF = 16 mA, VCC = 5 V, RL = 2.2 k
4
3
2
tPLH tPHL
1
0 -50
-25
0
25
50
75
100
Ambient Temperature TA (C)
Remark
The graphs indicate nominal characteristics.
8
Data Sheet PN10418EJ04V0DS
PS8802-1,-2
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Tape)
5.560.1
2.00.05 4.00.1
1.750.1
1.5+0.1 -0
4.05 MAX.
1.70.1 8.00.1
12.00.2
5.50.1
6.40.1
3.60.1
0.30.05
Taping Direction
PS8802-1-F3 PS8802-2-F3 PS8802-1-F4 PS8802-2-F4
Outline and Dimensions (Reel)
2.00.5
2.00.5 13.00.2
R 1.0
21.00.8
3302.0
13.00.2
1001.0
13.51.0 17.51.0
Packing: 1 500 pcs/reel
11.9 to 15.4 Outer edge of flange
Data Sheet PN10418EJ04V0DS
9
PS8802-1,-2
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
1.45
5.25
10
Data Sheet PN10418EJ04V0DS
1.27
0.8
PS8802-1,-2
NOTES ON HANDLING 1. Recommended soldering conditions
(1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.)
Recommended Temperature Profile of Infrared Reflow
Package Surface Temperature T (C)
(heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating)
Time (s)
(2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron * Peak temperature (lead part temperature) 350C or below * Time (each pins) * Flux 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C.
Data Sheet PN10418EJ04V0DS
11
PS8802-1,-2
(4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings.
USAGE CAUTIONS
1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity.
12
Data Sheet PN10418EJ04V0DS
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of PS8802-1

	To Download PS8802-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .